Set of four balanced 1400cc high impedance fuel injectors. 600whp+ capable on E85.

These are NOT DROP IN and require the use of an ATS Top Feed Fuel Rail. Bottom adapters are included but are unlikely to work with other brand rails.

These are high impedance injectors. On Gen2/3 you should remove the injector resistor pack. Cut the connecter off the resistor pack and connect all five wires to each other to send 12V directly to the injectors.

We balance these in house within 1%. They average 1280cc at 3 bar and 1540cc at 4 bar. Your set will come with the specific flow rate noted. We typically run these at 50psi base fuel pressure.