This writeup/estimate was put together a few years ago. Many of the parts have changed. We will be updating this and adding more options in the near future.
Labor
Hours |
Service Person |
Description |
Rate |
Total |
23.00 |
ATS |
r&r motors |
75.00 |
1,725.00 |
3.00 |
ATS |
assemble long block |
75.00 |
225.00 |
10.00 |
ATS |
tuning AEM |
75.00 |
750.00 |
0.50 |
ATS |
throttle cable bracket |
75.00 |
37.50 |
1.50 |
ATS |
race gas tuning |
75.00 |
112.50 |
6.40 |
ATS |
install dual fuel pumps |
75.00 |
480.00 |
1.30 |
ATS |
install CV's in axles |
75.00 |
97.50 |
2.00 |
ATS |
install gauges |
75.00 |
150.00 |
9.00 |
ATS |
install WTA IC, incl heat exchanger |
75.00 |
675.00 |
2.00 |
ATS |
degree cams on dyno |
75.00 |
150.00 |
Labor Subtotal |
4,402.50 |
Total Labor Cost |
4,402.50 |
Parts
Item Description |
Qty |
Unit Cost |
Line Total |
RMR 70mm manifold |
1 |
695.00 |
695.00 |
65mm throttle body with MR2 throttle cam |
1 |
209.00 |
209.00 |
AEM Standalone |
1 |
1625.00 |
1625.00 |
AEM wideband |
1 |
319.00 |
319.00 |
AEM serial gauge |
1 |
279.00 |
279.00 |
dual gauge pod |
1 |
39.00 |
39.00 |
Greddy Profec B |
1 |
319.00 |
319.00 |
ATS 2.2l Stroker short block |
1 |
2200.00 |
2200.00 |
HKS 264 cams |
2 |
340.00 |
680.00 |
ATS adjustable cam gears |
1 |
150.00 |
150.00 |
3 angle valve job |
1 |
450.00 |
450.00 |
replace exhaust guides |
8 |
8.00 |
64.00 |
Ferrea Valves |
16 |
19.50 |
312.00 |
Cut seats for larger valves |
16 |
8.00 |
128.00 |
ATS valve springs |
1 |
96.00 |
96.00 |
oil pump, high volume |
1 |
169.00 |
169.00 |
TTE head gasket |
1 |
160.00 |
160.00 |
Toyota gasket kit |
1 |
209.00 |
209.00 |
Wolfkatz rail |
1 |
325.00 |
325.00 |
Walbro Fuel pump |
2 |
129.00 |
258.00 |
1150cc injectors |
4 |
130.00 |
520.00 |
fuel line kit with fittings |
2 |
149.00 |
298.00 |
L19 head studs |
1 |
350.00 |
350.00 |
idle air control motor |
1 |
99.00 |
99.00 |
TPS connectors |
2 |
14.99 |
29.98 |
MAP sensor 3.5 bar |
1 |
158.99 |
158.99 |
vacuum fitting for RMR |
8 |
1.99 |
15.92 |
catch can |
1 |
99.99 |
99.99 |
ait sensor |
1 |
39.99 |
39.99 |
ATS 4" intake |
1 |
150.00 |
150.00 |
ATS CV joints |
1 |
299.00 |
299.00 |
gallon 110 Octane (tuning) |
5 |
6.00 |
30.00 |
axle seal |
2 |
17.99 |
35.98 |
CM stage 4 clutch |
1 |
499.00 |
499.00 |
flywheel - lightweight |
1 |
369.00 |
369.00 |
flywheel bolts |
8 |
6.79 |
54.32 |
ATS GT3582 turbocharger kit |
1 |
2700.00 |
2700.00 |
WTA intercooler core |
1 |
499.00 |
499.00 |
blow off valve (typical) |
1 |
199.00 |
199.00 |
intercooler charge pipe set |
1 |
300.00 |
300.00 |
front mount heat exchanger |
1 |
249.00 |
249.00 |
intercooler water line and fitting kit |
1 |
219.00 |
219.00 |
intercooler water pump |
1 |
187.00 |
187.00 |
intercooler reservoir |
1 |
119.00 |
119.00 |
antifreeze |
3 |
14.99 |
44.97 |
oil 10w-30 |
4 |
1.99 |
7.96 |
oil filter - Toyota |
1 |
7.99 |
7.99 |
transmission refill kit |
1 |
59.00 |
59.00 |
Berk Technology 3" exhaust |
1 |
599.00 |
599.00 |
Parts subtotal |
17,027.08 |
Tax @ 8.5% |
1,447.30 |
Shop Items |
125.00 |
Labor |
4,402.50 |
Total |
23,001.88* |
We have made over 575 whp with this setup at ~27 psi (750 flywheel hp) on Aaron's 2.2 MR2
If you are shipping the vehicle to/from outside of Texas the sales tax can be removed. We can provide a shipping service anywhere in the US. Contact us for pricing.
* This quote assumes a good condition MR2, with acceptable core parts (block, head, etc) and a good to excellent condition transmission. If you have any doubts about the condition of your transmission we recommend purchasing a new LSD transmission. Also we can offer rebuilt 91-92 style transmissions or rebuild your transmission and install a more aggressive aftermarket LSD if you prefer. Other options exist such as ceramic coatings, engine dress up parts, short shifters and complete suspension upgrades.
Timeframe: unless special arrangements are made, expect your build to take between 3 and 4 months depending on product availability.